Tapco Paintball Stocks
September 4th, 2010
How’s this woodsball setup?
This is what I’m thinking of getting for my woodsball arsenal. Some of this stuff I have, some I don’t.
(Primary Gun)
Mil Sig K-Series CQB Pro
3x Magazines
BT Tactical Fixed Sniper Stock
16″ Maddog Tippmann A-5 X/7 Military Paintball Barrel
Tapco Red Dot Scope (I bought this before I started to paintball)
12 Oz Pure Energy CO2 tank on a remote line
(Sniper Rifle)
Tippmann A-5 w/
Tippmann Straight Shot Barrel
BT Bi-Pod
X-7 Low Profile Hopper w/riser
Tapco Red Dot Scope (same as above, I wouldn’t have both guns used at the same time)
G36 Folding Stock
Same air setup as Mil Sig.
(Side Arm/Backup Gun)
Ariakon Overlord RX w/
Ariakon Holster
2x Magazines
I’m bored and thought I’d throw this out there. I plan on buying the Mil Sig in a week or so, but I already have the A-5 and Overlord RX.
its kinda a waste of 5 points but for the m16 u will definitely need more clips they hold like 18 each whats the point of a pistol in paintball but everything else looks good
Tippmann 98 Custom with Ups
|
|
Tippmann X7 X-7 Paintball Adjustable TACTICAL Stock $15.85 Features Designed to fit on the Tippmann X7 Manufactured out of high impact grade composite Includes stock and tube 6 position stock easily adjusts Ergonomically designed for better comfort Lighter weight than most stocks One Year Warranty… |
|
|
Spyder MR Series Paintball Tactical SNIPER Stock for MR1 MR2 MR3 MR4 $24.95 Features Designed to fit on the Spyder MR1, MR2, MR3, or MR4 Manufactured out of high impact grade composite Includes stock and tube 6 position stock easily adjusts Ergonomically designed for better comfort Lighter weight than most stocks One Year Warranty… |
|
|
16 Tippmann 98 Custom Pro M16 Combat Barrel + Stock $69.95 Description This gives you an Assault upgrade kit for your Tippmann 98 paintball gun. You get one 16″ Combat Paintball Barrel and one six position adjustable paintball stock. 16″ Combat Barrel This upgrade gives your Tippmann 98, 98 Custom, or Custom Pro paintball gun the Mil-Sim Assault Style look, will also fit the BT-16 paintball gun. The Barrel is 16″ in length and provides extreme accuracy…. |
|
|
TAPCO A-5 T6 Collapsible CAR Stock – Black $29.99 Tactical Practical and Economical. The T6 adjustable stock… just like the ones used by military special operation forces. Priced well below many lower quality alternatives this T6 adjustable stock is virtually unbreakable. Manufactured from the same heavy-duty composite plastic used in military stocks the tube is made specifically for paintball markers. You will never have to worry about rusting or screws coming loose. Improve your shooting accuracy – the T6 adjustable stock quickly and easily adjusts to 6 different positions. This insures each individual gets a perfect fit even when wearing protective gear. Made in the USA. |
|
|
Tapco Liberty A5 Collapsible M4 Stock – Aluminum Tabs $34.99 “Liberty Stocks examined where the majority of competitor’s stocks failed on the field and determined that the main point where breakage occured was the tabs holding the pins in place. Based on the excellent reputation of their X7 stock design they now introduce their Collapsible M4 Stock with Aluminum Tabs. Threaded aluminum tabs now slide into the marker body for a stronger, nearly indestructible connection between stock and marker. A threaded bolt and locking nut replace the pushpins for a secure fit and no more snapped pushpins or bent springs. Made in the USA with a Limited Lifetime Warranty, you can be assured that you are getting the best A5 collapsible stock money can buy!” |
|
|
Tapco A5 Solid Stock for Tippmann A5 $29.99 The Tapco Solid Stock gives that solid look and feel of some of the world’s most popular battle rifles. Built of tough yet lightweight material with a rubber non-slip buttplate that stays to your shoulder. Angled down from the muzzle plane to allow clearance for your mask. Includes removable plug for sling mount. A great looking accessory to turn heads at the next scenario paintball game! |
|
|
TAPCO Model 98 Folding Stock $29.99 Choose the Tapco Folding Stock when maneuverability is the key in your game.Features:Designed with a high tension locking system for better control when fully extendedRibbed butt plate prevents slips when aiming for your targetConveniently folds down to a compact size for easy transport and agility when you need it mostConstructed of a sturdy military grade composite and is extremely lightMade in the U.S.A.Sorry SP-1 shooters this will not fit the SP-1 Stock Adapter Plate. |
|
|
TAPCO Model 98 ACT Collapsible Stock – Black $29.99 Designed to fit on the Tippmann Model 98 ACTManufactured out of military grade composite to ensure high quality and strength Includes stock and tube 6 position stock easily adjusts to desired length Ergonomically designed for better comfort Made in the U.S.A. Lifetime Tapco warranty |
|
|
Tapco Collapsible M16 CAR Stock for Tippmann X7 $39.99 “This M16 Collapsible CAR stock is made by Tapco, one of the most trusted names in military/ law enforcement supply. The weakest point on any X7 stock is where the tabs insert into the marker body, often snapping or breaking when you least need it to. Tapco identified this and designed their X7 stock with aluminum tabs, threaded to accept bolts that screw through the frame pin holes. After scrambling through the dirt or against the base of that fort you know you won’t look down to see your stock in pieces. Adjust to 6 positions so you can find that right fit. Made in the USA and includes all hardware needed to install.” |
|
|
Tapco M 1913 Rail Panels $11.99 Protect the exposed rails on your tactical handguard system with these durable and lightweight polymer panels. These covers offer a more comfortable surface and reduce heat transfer to your hands. The set includes 2 panels that securely slide and lock onto your rails. |
|
|
TAPCO Model 98 ACT Collapsible Stock – Olive Drab $29.99 Designed to enhance the ergonomics of the HK pattern rifle our T6 collapsible stock offers many advantages over the original. The TAPCO six (6) position stock fits the weapon to the operator regardless of body type or individual equipment. Both the stock body and the receiver extension are constructed of military grade composite.Specs:Lengths of Pull:13 ¾ (Collapsed)14 ½15 ½16 ¼1717 ¾ (Fully Extended) |
|
|
Tapco Deluxe Ergonomic Foregrip for Tactical Rail $24.99 This is the real deal the same foregrip used by elite police and military forces around the world. Ergonomic shape fits your hand like a glove and the non-slip texture helps maintain your grip even with paint-smeared gloves. Mounts and removes without tools to any 7/8 picatinny or weaver rail and is quickly adjustable to wherever you want it on the rail. Other featured include removable slots for accessory pressure switch placement and watertight internal storage for spare batteries o-rings etc. The best… and last… foregrip you’ll ever need!Features:Internal battery compartment (3-3v 2-AA 2-AAA).Pressure switch housing on right or left side.Mounts to Picatinny or Weaver rails.Designed to be ergonomic and non-slip. |
|
|
TAPCO A-5 Collapsible CAR Stock – Olive Drab $29.99 Features:Designed to fit on the Tippmann A5 and PCS US5 MarkersManufactured out of military grade composite to ensure high quality and strengthIncludes stock and tube6 position stock easily adjusts to desired lengthErgonomically designed for better comfortMade in the U.S.A. |
|
|
Tapco A-5 Collapsible CAR Stock – ACU Digi Camo $39.99 With our military and law enforcement customers in mind our T6 Collapsible Stock has been designed with necessary improvements over traditional models. Reinforced latch supports and a thicker buttplate ensures the stock assembly will provide a solid platform for engaging your target. The six (6) position stock fits the weapon to the shooter regardless of body type or the individual equipment being worn. It is ideal when operating in confined environments or when compact storage is required. Sold as a complete installation kit the T6 stock includes the receiver extension buffer with spring locking nut with plate and sling swivel. Manufactured of military grade composite for years of use.Specs:Lengths of Pull:10.5 (Collapsed)11.5 12.25 13 13.75 14.5 (Fully Extended) |
|
|
TAPCO SAIGA STOCKS INTRAFUSE SAIGA HANDGUARD BLACK $39.99 This versatile handguard is a crucial addition to Saiga rifle or shotgun upgrade. It features an optional side and bottom rail and is designed for maximum flexibility in a variety of configurations. This lightweight unit has added ventilation to ensure cooler usage after many rounds and the included Sling Nut allows the easy addition of a tactical sling. The handguard comes with everything needed to adapt to the Saiga 7.62 x 39mm, .223, .308, or the 12 and 20 gauge Saiga shotguns. Note: Will not work on the .410. SPECS: Package includes: Adaptors for use on the above firearm models, single Picatinny bottom rail, dual Picatinny side rails, and sling nut. |
|
|
Paintball $6.99 Paintball |
|
|
No Slip Rubber Butt Pad for M4/ M16 Collapsible Stocks $9.99 When you bring your marker or airsoft rifle’s stock up to your shoulder the last thing it needs is to slip off your shoulder. Wet conditions or a paint splattered tac vest can increase the odds of this happeneing. Keep your buttplate where it is supposed to be with this no slip rubber buttplate. Designed to fit the most popular design of collapsible stocks this butt pad has deep grooves for friction against your shoulder cup or tac vest. Made of tough pliable rubber and slips on without tools yet stays put through virtually any conditions.Features:Easy installation.Provides non slip stock placement.Softens sharp edges of stock . |
|
|
T6/M4 Recoil Pad Tapco M4/T6 Recoil Pad $9.99 No permanent alterations necessary to your M4 or Tapco T6 collapsible stock to add increased shooting comfort lower felt recoil plus an additional 1⁄2" to the length-of-pull. Rubber pad slips easily over the plastic buttplate; held in position by rubber tabs and a friction collar. Won’t shoot loose stays put until it’s removed. Great accessory for competitive shooters; raised non-slip surface helps keep your rifle or shotgun on-shoulder during long shooting strings or moving courses of fire. Mfg: Tapco Weapons Accessories SPECS: Rubber black. Adds ½" (12.7mm) to length-of-pull. Fits current M4 collapsible stock designs and Tapco T6 stocks. |
|
|
T6/M4 RECOIL PAD TAPCO M4/T6 RECOIL PAD $9.99 No permanent alterations necessary to your M4 or Tapco T6 collapsible stock to add increased shooting comfort, lower felt recoil, plus an additional 1⁄2″ to the length-of-pull. Rubber pad slips easily over the plastic buttplate; held in position by rubber tabs and a friction collar. Won’t shoot loose, stays put until it’s removed. Great accessory for competitive shooters; raised, non-slip surface helps keep your rifle or shotgun on-shoulder during long shooting strings or moving courses of fire. SPECS: Rubber, black. Adds ½” (12.7mm) to length-of-pull. Fits current M4 collapsible stock designs and Tapco T6 stocks. |
|
|
TAPCO SAIGA STOCKS SAIGA 7.62 GALIL STYLE HANDGUARD DKE $49.99 This versatile handguard is a crucial addition to Saiga rifle or shotgun upgrade. It features an optional side and bottom rail and is designed for maximum flexibility in a variety of configurations. This lightweight unit has added ventilation to ensure cooler usage after many rounds and the included Sling Nut allows the easy addition of a tactical sling. The handguard comes with everything needed to adapt to the Saiga 7.62 x 39mm, .223, .308, or the 12 and 20 gauge Saiga shotguns. Note: Will not work on the .410. SPECS: Package includes: Adaptors for use on the above firearm models, single Picatinny bottom rail, dual Picatinny side rails, and sling nut. |
|
|
TAPCO SAIGA STOCKS SAIGA 7.62 GALIL STYLE HANDGUARD ODG $49.99 This versatile handguard is a crucial addition to Saiga rifle or shotgun upgrade. It features an optional side and bottom rail and is designed for maximum flexibility in a variety of configurations. This lightweight unit has added ventilation to ensure cooler usage after many rounds and the included Sling Nut allows the easy addition of a tactical sling. The handguard comes with everything needed to adapt to the Saiga 7.62 x 39mm, .223, .308, or the 12 and 20 gauge Saiga shotguns. Note: Will not work on the .410. SPECS: Package includes: Adaptors for use on the above firearm models, single Picatinny bottom rail, dual Picatinny side rails, and sling nut. |
|
|
TAPCO SAIGA STOCKS INTRAFUSE SAIGA HANDGUARD OD GREEN $39.99 This versatile handguard is a crucial addition to Saiga rifle or shotgun upgrade. It features an optional side and bottom rail and is designed for maximum flexibility in a variety of configurations. This lightweight unit has added ventilation to ensure cooler usage after many rounds and the included Sling Nut allows the easy addition of a tactical sling. The handguard comes with everything needed to adapt to the Saiga 7.62 x 39mm, .223, .308, or the 12 and 20 gauge Saiga shotguns. Note: Will not work on the .410. SPECS: Package includes: Adaptors for use on the above firearm models, single Picatinny bottom rail, dual Picatinny side rails, and sling nut. |
|
|
TAPCO SAIGA STOCKS SAIGA 7.62 GALIL STYLE HANDGUARD BLK $49.99 This versatile handguard is a crucial addition to Saiga rifle or shotgun upgrade. It features an optional side and bottom rail and is designed for maximum flexibility in a variety of configurations. This lightweight unit has added ventilation to ensure cooler usage after many rounds and the included Sling Nut allows the easy addition of a tactical sling. The handguard comes with everything needed to adapt to the Saiga 7.62 x 39mm, .223, .308, or the 12 and 20 gauge Saiga shotguns. Note: Will not work on the .410. SPECS: Package includes: Adaptors for use on the above firearm models, single Picatinny bottom rail, dual Picatinny side rails, and sling nut. |
|
|
TAPCO SAIGA STOCKS INTRAFUSE SAIGA T6 STOCK SET DKEARTH $54.99 This versatile handguard is a crucial addition to Saiga rifle or shotgun upgrade. It features an optional side and bottom rail and is designed for maximum flexibility in a variety of configurations. This lightweight unit has added ventilation to ensure cooler usage after many rounds and the included Sling Nut allows the easy addition of a tactical sling. The handguard comes with everything needed to adapt to the Saiga 7.62 x 39mm, .223, .308, or the 12 and 20 gauge Saiga shotguns. Note: Will not work on the .410. SPECS: Package includes: Adaptors for use on the above firearm models, single Picatinny bottom rail, dual Picatinny side rails, and sling nut. |
|
|
TAPCO SAIGA STOCKS INTRAFUSE SAIGA HANDGUARD DARK EARTH $39.99 This versatile handguard is a crucial addition to Saiga rifle or shotgun upgrade. It features an optional side and bottom rail and is designed for maximum flexibility in a variety of configurations. This lightweight unit has added ventilation to ensure cooler usage after many rounds and the included Sling Nut allows the easy addition of a tactical sling. The handguard comes with everything needed to adapt to the Saiga 7.62 x 39mm, .223, .308, or the 12 and 20 gauge Saiga shotguns. Note: Will not work on the .410. SPECS: Package includes: Adaptors for use on the above firearm models, single Picatinny bottom rail, dual Picatinny side rails, and sling nut. |
|
|
TAPCO SAIGA STOCKS INTRAFUSE SAIGA T6 STOCK SET ODGREEN $54.99 This versatile handguard is a crucial addition to Saiga rifle or shotgun upgrade. It features an optional side and bottom rail and is designed for maximum flexibility in a variety of configurations. This lightweight unit has added ventilation to ensure cooler usage after many rounds and the included Sling Nut allows the easy addition of a tactical sling. The handguard comes with everything needed to adapt to the Saiga 7.62 x 39mm, .223, .308, or the 12 and 20 gauge Saiga shotguns. Note: Will not work on the .410. SPECS: Package includes: Adaptors for use on the above firearm models, single Picatinny bottom rail, dual Picatinny side rails, and sling nut. |
|
|
Tippmann – Special Ops A5 Dogleg Air-Thru Stock $109.95 The Dogleg Air-Thru Stock has an innovative design that allows the shooter to achieve a sightline unequaled by other paintball stocks. The stock doglegs around the shooter’s head and returns to rest securely on the shoulder. It is made from solid machined and formed aluminum and has an over-molded (integrated) air line. Features also include a stainless steel braided air line and high performance ASA fitting. Length: 11 inches Bow offset: 2 inches (measured from center) |
Categories: Paintball